Materials chipper to reduce volume Press release from Lanner Anlagenbau - 2010-05-06 LANNER® chip crusher LANNER® chip crushers are suitable for breaking up steel wool, stainless steel, titanium, aluminium, brass and cast chips that are high in oil content. The broken, free flowing chips achieve around 20% of their original volume depending on the type of material. Chips [...]
Posted on May 22nd, 2010 by Editor
Filed under: EQUIPMENT, MANUFACTURING, MATERIALS, STORAGE, WASTE | No Comments »
Projects: Realisations Perwez – Three 1500kW wind turbines – September 2006 This project consists of three 1.5MW windmills installed in cooperation with Aspiravi. The windmill farm has an average annual energy production of 9.8GWh (9,800,000 kWh), which equals the annual energy needs of approximately 3000 families. Sourced & published by Henry Sapiecha 18th July 2009
Posted on July 18th, 2009 by Editor
Filed under: ELECTRICITY, ENVIRONMENT, MANUFACTURING, WIND | No Comments »
Projects: Realisations Middelkerke – One 800kW wind turbine – June 2007 The Middelkerke solar farm already featured 2 windmills; a third one was added with a capacity of 800kW. All in all, the site in Lombardsijde provides green energy for some 2000 families. Sourced and published by Henry Sapiecha 18th July 2009
Posted on July 18th, 2009 by Editor
Filed under: EVENTS, MANUFACTURING, SOLAR, WIND | No Comments »
NATURAL GAS DRIVEN & POWER TO BURN – CLEAN POWER – JAPANHalfway between the centre of Tokyo and Narita Airport is Makuhari New City, the centre of Japan’s latest and boldest trigeneration experiment. The city’s Makuhari District Heating and Cooling Centre (MDHCC) owned and operated by EnergyAdvance iscontributing positively to the city which is energy-rich [...]
Posted on July 16th, 2009 by Editor
Filed under: CARBON TRADING, ELECTRICITY, ENVIRONMENT, EVENTS, FINANCE, MANUFACTURING, NATURAL GAS | No Comments »
Mitsubishi Heavy to Test CO2 Recovery from Coal-fired Flue Gas Printer-Friendly digg This! E-Mail Article del.icio.us Absorbing solution “KS-1.” It is an amine-based material having an absorbing performance higher than that of monoethanolamine (MEA), which has been used thus far. The KS-1 helps reduce the amount of absorbing solution used in the entire plant. A [...]
Posted on July 1st, 2009 by Editor
Filed under: BY-PRODUCTS, CARBON TRADING, CLIMATE CHANGE, COAL, ENVIRONMENT, EQUIPMENT, FINANCE, FIRE, HEATING, MANUFACTURING, WOOD | No Comments »
Industry & Innovation: The New Face of Manufacturing 03/17/2009 – 03/18/2009 GIE Media, Inc. announces the dates for a new manufacturing conference, scheduled for March 17-18, 2009, to be held at the InterContinental Hotel and Conference Center in Cleveland, OH. This new event, ???Industry & Innovation: The New Face of Manufacturing,??? will benefit professionals in [...]
Posted on June 23rd, 2009 by Editor
Filed under: EVENTS, MANUFACTURING | No Comments »
Rexroth Brochure Highlights Sustainable Manufacturing Bosch Rexroth announces a new brochure featuring a wide range of products, technologies and concepts designed to maximize manufacturing energy savings and sustainability – one of today’s key engineering challenges. Available at www.boschrexroth-us.com/sustainable, Sustainability with System: Rexroth Solutions for Energy Efficiency focuses on helping industries meet ambitious goals for energy [...]
Posted on June 23rd, 2009 by Editor
Filed under: INSTRUMENTS, MANUFACTURING, SAVE ENERGY | No Comments »
First Solar Broke $1 Per Watt Barrier in Q4 2008 First Solar, Inc. recently announced it reduced its manufacturing cost for solar modules in the fourth quarter to 98 cents per watt, breaking the $1 per watt price barrier. “This achievement marks a milestone in the solar industry’s evolution toward providing truly sustainable energy solutions,” [...]
Posted on June 23rd, 2009 by Editor
Filed under: GENERAL, MANUFACTURING, SOLAR | No Comments »
The successful Precision Machining Technology Show (PMTS) 04/28/2009 – 04/30/2009 North America’s only production machining focused show – returns to the Greater Columbus Convention Center in Columbus, OH, April 28-30, 2009. PMTS is an international gathering of manufacturers, suppliers and end users of products and services dedicated entirely to the production of precision machined products [...]
Posted on June 23rd, 2009 by Editor
Filed under: EVENTS, GENERAL, MANUFACTURING, TECHNOLOGY | No Comments »
HANNOVER MESSE 2009 04/20/2009 – 04/24/2009 The entire scope of innovative industrial technologies at a single event. In 2009, 13 flagship fairs of international renown are being featured at HANNOVER MESSE as the world’s largest and most important showcase for industrial technology. Among them is the brand new Wind trade fair. This year’s keynote theme [...]
Posted on June 23rd, 2009 by Editor
Filed under: EVENTS, MANUFACTURING, WIND | No Comments »